How to use the DC Blower correctly? DC Blower are widely used in large and modern blast furnaces because of their compact structure, small size, light weight, good load adjustability, wide range of applications, low rotational inertia of the blower, and easy motor start.What are the application area

How do we use the DC axial fan?DC axial fans for control cabinets are typically used in equipment with high flow requirements and low pressure requirements. Axial fan is used to move the air in the same position. And it’s control cabinets mainly consists of impeller and casing with simple structure

At present, the voltage of the fan we produce is DC voltage, and a fixed electronic switch (such as Hall IC) is used to replace the brush, and the current switch is implemented to drive the rotor to continue to run. It is called a "DC brushless fan", also called "DC axial fan". Xingdong mainly has 5v, 12v, 24v, 48v and other DC axial fans.

The cross-flow of a tangential fan, sometimes known as a tubular fan, was patented in 1893 by Paul Mortier and is used extensively in heating, ventilation, and air conditioning (HVAC), especially in ductless split air conditioners. The fan is usually long concerning the diameter, so the flow remains approximately two-dimensional away from the ends. The cross-flow fan uses an impeller with forward-curved blades, placed in a housing consisting of a rear wall and a vortex wall. Unlike radial machines, the main flow moves transversely across the impeller, passing the blading twice. What follows is a more detailed explanation of it and its functions. Below are some details about cross-flow fans and aluminum alloy cross flow fans.